
SOUND AND LIGHTING RIDER
SOUND AND LIGHTING: PURCHASER shall provide adequate sound production for size of venue as per the below requirements with a qualified sound technician. PURCHASER shall provide complete lighting system as per the below requirements with a qualified lighting technician.
The following are the MINIMUM sound and lighting requirements.
HOUSE MIX
24 Channel mixer w/3-way power system including the MINIMUM of double 18" subs per side and mid/high packs w/ two 15" mid cones and 2" compression drivers.
2- Effect units, Reverb and Delay
MONITOR MIXES
3-Mixes that includes 1 SL wedge, 1 SR wedge, and a bi-amped drum monitor.
MICROPHONES
3-vocal mics, 1 SL and 1 SR mic (SM58), 1 drum mic (head set)
1-guitar mic (SM 57)
3-direct boxes, (bass, drums,sequencer)
1-kick mic (Beta 52)
1-snare mic (sein. 604)
1-hi hat, (PG 81)
4-rack tom mics (sein. 604)
2-floor tom mics (SM 57)
2-overheads (PG 81)
LIGHTING
1-followspot
16-64 par cans
DRUM RISER
Minimum 8 by 8 and at least 2 feet high
ELIMINATOR STAGE INPUT
Note to sound technician, the stage plot packet will include, set list, stage plot, and intro cd which should be played when stage manager gives you the signal. The intro lasts 2 minutes, blackout lights during intro, when the drums to Gimme All Your Lovin' begin, turn up lights , and fade off intro.
1- intro
3- vocals, stage left, stage right, drums (head set)
1- guitar, stage left
1- d.i. bass, stage right
1- d.i. (sequencer) drums
1- d.i. elec. drums
1- kick drum
1- snare
1- high hat
2- rack toms
1- floor tom
2- overheads
#####MONITOR MIXES#####
1- stage left, 1- stage right, 1- drum fill
All vocals in all monitors, sequence in stage left and right monitors, guitar in all monitors.